To Next Page

To Previous Page

6 ENGLISH

Type of lter

Normal lter

► 1. Capsule 2. Prelter 3. Filter

High performance lter

► 1. Capsule 2. High performance lter

Disposing of dust

CAUTION:

• Empty the cleaner before it becomes too full, or

the suction force weakens.

• Be sure to empty out the dust inside the cleaner

itself. Failure to do so may cause the lter to be

clogged or the motor to be damaged.

Disposing of dust for normal lter

In order to drop dust sticking on the lter in the capsule,

tap the capsule 4 or 5 times with your hand.

Now point suction inlet downwards, turn capsule in

direction of arrow in diagram, and disconnect capsule

slowly and straight.

► 1. Capsule 2. Suction inlet

NOTE:

• Dust may spill out when capsule is opened, so

be sure to set a garbage bag beneath capsule.

Remove accumulated dust from inside of capsule and

off of prelter.

► 1. Prelter 2. Capsule

Twist prelter in direction of arrow to unfasten securing

lip from cleaner unit and then pull off prelter.

► 1. Prelter 2. Securing lip

Clean out ne dust from prelter. Next, remove lter,

and lightly tap to dislodge dust.

Makita XLC02 User Manual

Questions and Answers: