Why does my Makita Lawn Mower motor stop after a short time?
If the motor of your Makita Lawn Mower stops running after a short period, the battery's charge level might be low, so recharge or replace the battery cartridge. Another possible cause is that the cutting height is too low, so increase it. Lastly, check for and remove any cut grass that may be clogging the mower.
What to do if the Makita XML10 blade does not rotate?
If the blade of your Makita Lawn Mower does not rotate, stop the mower immediately. A foreign object, like a branch, may be jammed near the blade. Remove any such object. If removing objects doesn't solve the issue, the drive system may not be working correctly, in which case you should ask your local authorized service center for repair.
Why Makita XML10 motor does not reach maximum RPM?
If your Makita Lawn Mower's motor does not reach maximum RPM, ensure the battery cartridge is correctly installed as described in the manual. If the battery power is dropping, recharge or replace the battery cartridge. If these steps don't resolve the issue, the drive system may not be working correctly, and you should ask your local authorized service center for repair.
What causes abnormal vibration in Makita XML10?
If you notice abnormal vibration in your Makita Lawn Mower, stop the mower immediately. The blade may be imbalanced or excessively worn. Replace the blade.
Basic safety precautions to reduce risk of fire, electric shock, and injury.
Instructions for safe operation, environment, and user readiness.
How to mow, including width, overlap, direction, and grass basket usage.
Using mulching plug, rear discharge, and handling long grass.
Soft start and electric brake features for enhanced operation.
Steps for cleaning, checking parts, and general upkeep of the mower.
Guidelines for carrying the mower and storing it properly indoors.
Important safety instructions for using and caring for battery cartridges.
Steps to attach and secure the mower handle.
Instructions for assembling the grass basket and attaching the mulching plug.
Procedures for installing, removing, and understanding battery cartridge functions.
Explains overload, overheat, and overdischarge protection mechanisms.
Details on main power switch, switch lever, and battery indicators.
How to set the cutting height for the lawn mower.
How to adjust handle height and traveling speed.
Step-by-step guide to remove and install the mower blade.
Identifies common mower issues and provides remedies.
Information on recommended accessories for the mower.
Details about the product's warranty coverage.
General| Motor Type | Brushless |
|---|---|
| Blade Type | Rotary |
| Deck Material | Steel |
| Power Source | Battery |
| Battery Type | Li-Ion |
| No Load Speed | 3, 300 RPM |
| Cutting Height Adjustment | 10 positions |
| Voltage | 36V (18V x2) |
To Next Page
