Why does my Makita XML13 motor stop after a short time?
If the motor of your Makita Lawn Mower stops running after a short period, the battery's charge level might be low, so recharge or replace the battery cartridge. Another possible cause is that the cutting height is too low, so increase it. Lastly, check for and remove any cut grass that may be clogging the mower.
What to do if the Makita Lawn Mower blade does not rotate?
If the blade of your Makita Lawn Mower does not rotate, stop the mower immediately. A foreign object, like a branch, may be jammed near the blade. Remove any such object. If removing objects doesn't solve the issue, the drive system may not be working correctly, in which case you should ask your local authorized service center for repair.
Why Makita XML13 motor does not reach maximum RPM?
If your Makita Lawn Mower's motor does not reach maximum RPM, ensure the battery cartridge is correctly installed as described in the manual. If the battery power is dropping, recharge or replace the battery cartridge. If these steps don't resolve the issue, the drive system may not be working correctly, and you should ask your local authorized service center for repair.
What causes abnormal vibration in Makita XML13?
If you notice abnormal vibration in your Makita Lawn Mower, stop the mower immediately. The blade may be imbalanced or excessively worn. Replace the blade.
General| Brand | Makita |
|---|---|
| Model | XML13 |
| Category | Lawn Mower |
| Language | English |
To Next Page
