Why does my Makita Lawn Mower motor stop after a short time?
If the motor of your Makita Lawn Mower stops running after a short period, the battery's charge level might be low, so recharge or replace the battery cartridge. Another possible cause is that the cutting height is too low, so increase it. Lastly, check for and remove any cut grass that may be clogging the mower.
What to do if the Makita XML11 blade does not rotate?
If the blade of your Makita Lawn Mower does not rotate, stop the mower immediately. A foreign object, like a branch, may be jammed near the blade. Remove any such object. If removing objects doesn't solve the issue, the drive system may not be working correctly, in which case you should ask your local authorized service center for repair.
Why Makita XML11 motor does not reach maximum RPM?
If your Makita Lawn Mower's motor does not reach maximum RPM, ensure the battery cartridge is correctly installed as described in the manual. If the battery power is dropping, recharge or replace the battery cartridge. If these steps don't resolve the issue, the drive system may not be working correctly, and you should ask your local authorized service center for repair.
What causes abnormal vibration in Makita Lawn Mower?
If you notice abnormal vibration in your Makita Lawn Mower, stop the mower immediately. The blade may be imbalanced or excessively worn. Replace the blade.
General| Deck Material | Steel |
|---|---|
| Foldable Handle | Yes |
| Power Source | Battery |
| Voltage | 36V |
| Battery Type | Li-ion |
| No Load Speed | 3, 300 RPM |
| Wheel Size (Rear) | 8 inches |
| Battery Capacity | 3.0 Ah |
| Grass Collector Capacity | 30 L |
| Cutting Width | 21" (53 cm) |
Details technical specifications including model, dimensions, speeds, weight, and protection rating.
Covers safe attire, protective gear, and rules for safe operation to prevent injury.
Details safe practices during mowing, such as avoiding hazards, proper blade use, and slope operation.
Explains battery handling, charging, servicing, and electrical safety precautions.
Key safety rules for battery handling, including charging, short-circuit prevention, and temperature limits.
Explains overload, overheat, and other protection systems that stop the mower.
Instructions on using the main power switch to turn the mower on and off.
Step-by-step guide for starting the mower using the lock key and switches.
Best practices for mowing, including width, overlap, direction, and grass basket checks.
Safety warnings and general overview for blade replacement.
Detailed steps for safely removing the mower blade using tools.
Detailed steps for correctly installing a new mower blade.
Lists common issues, probable causes, and remedies for mower malfunctions.
To Next Page
