To Next PageTo Next Page
Need help?Do you have a question about the Makita XPH07 and is the answer not in the manual?
General| Model | XPH07 |
|---|---|
| Category | Drill |
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Chuck Size | 1/2" |
| Max Torque | 1, 090 in.lbs. |
| No Load Speed | 0 - 550 / 0 - 2, 100 RPM |
| Variable Speed | Yes |
| Type | Cordless Hammer Driver-Drill |
| Weight | 5.6 lbs. |
Details drilling and fastening capacities for the XPH07 model.
Lists no load speed (RPM) and blows per minute for the tool.
Provides overall length, net weight, and rated voltage of the tool.
Lists standard battery cartridges compatible with the XPH07 model.
Guidelines for maintaining a safe work environment and preventing accidents.
Precautions related to electrical connections and preventing electric shock.
Recommendations for operator alertness, protective gear, and avoiding hazards.
Instructions on proper usage, care, and adjustments for the power tool.
Guidelines for safe and effective use and care of battery cartridges.
Recommendations for professional servicing and repairs to maintain safety.
Specific safety precautions for impact drilling operations.
Precautions for handling the tool and avoiding electrical hazards from wiring.
Explanation of symbols used for tool voltage, current, speed, and blows.
Critical safety guidelines for handling and using battery cartridges.
Recommendations for charging and usage to extend battery cartridge lifespan.
Step-by-step guide for correctly installing and removing the battery cartridge.
Explanation of the system that automatically cuts off power to extend battery life.
How to check the battery level using the LED display on the tool.
How to start, stop, and control tool speed using the switch trigger.
Instructions for changing the direction of rotation and setting the neutral position.
How to select between high (2) and low (1) speed settings for different tasks.
How to choose between rotation, hammering, or clutch modes using the action ring.
Guide to setting the clutch torque in 21 steps for screwdriving applications.
How to attach the auxiliary handle for improved control and safety.
Steps for inserting and removing bits from the chuck.
How to attach the bit holder for convenient storage of bits.
How to use the depth rod for drilling holes of uniform depth.
Instructions for temporarily hanging the tool using the hook.
Safety precautions and steps for performing hammer drilling operations.
How to use the optional blow-out bulb to clean dust from holes.
Steps for performing screwdriving tasks, including bit insertion and torque adjustment.
Advice on drilling pressure, bit sticking, and securing workpieces.
Tips for efficient wood drilling using drills with guide screws.
Techniques for drilling metal, including center-punching and using lubricant.
Important safety notes and guidelines for tool inspection and maintenance.
List of recommended accessories for use with the tool and safety advice.
Information on warranty coverage, exclusions, and claim procedures.
Details on limitations of indirect, incidental, and consequential damages.
