To Next PageTo Next Page
Need help?Do you have a question about the Makita XPH03 and is the answer not in the manual?
Guidelines for maintaining a safe work environment.
Precautions regarding electrical safety when using power tools.
Guidelines for personal safety while operating power tools.
Using the correct power tool for the application.
Checking for damage and ensuring proper tool condition.
Using only the manufacturer-specified charger.
Storing battery packs safely away from metal objects.
Wearing ear protection during impact drilling.
Gripping insulated surfaces to avoid shock from hidden wiring.
Precautions against short-circuiting battery cartridges.
Handling batteries carefully to avoid damage.
Charging battery before full discharge.
Step-by-step guide for installing and removing battery cartridges.
Explanation of the battery protection system.
Warning against direct eye exposure to the lamp.
Verifying rotation direction before starting.
Setting the switch to neutral when not in use.
Ensuring the speed lever is fully engaged.
Properly setting the action mode ring.
Adjusting torque in 21 steps for precise fastening.
Instructions for installing the auxiliary side grip.
Procedure for installing and removing bits.
Using side grip and firm hold for hammer drilling safety.
Setting the action mode for screwdriving.
Removing stuck bits using reverse rotation.
Securing small workpieces for safety.
Ensuring tool is off and battery removed before maintenance.
Removing carbon brush caps with pliers.
Details of the Makita Limited One Year Warranty policy.
Guidelines for personal safety while operating power tools.
Precautions regarding electrical safety when using power tools.
Checking for damage and ensuring proper tool condition.
Handling battery leakage and contact precautions.
Gripping insulated surfaces to avoid shock from hidden wiring.
Securing the workpiece for stability.
Precautions against short-circuiting battery cartridges.
Handling batteries carefully to avoid damage.
Charging battery before full discharge.
Step-by-step guide for installing and removing battery cartridges.
Explanation of the battery protection system.
Checking switch trigger function before use.
Locking the switch trigger in the OFF position.
Procedure for installing and removing the saw blade.
Cleaning debris from blade and clamp for safety.
Pressing the shoe firmly for stable cutting.
Ensuring tool is off and battery removed before maintenance.
Removing brush holder caps with pliers.
Details of the Makita Limited One Year Warranty policy.
General
