Need help?Do you have a question about the Makita XPH10 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Battery Type | Lithium-Ion |
| Max Torque | 480 in.lbs |
| Speed Settings | 2 |
| Chuck Size | 1/2" |
| Type | Hammer Drill |
| Battery | BL1830 |
| No Load Speed (RPM) | 0-600 / 0-1900 |
| Blows per Minute (BPM) | 0-9000 / 0-28500 |
Keep work area clean and lit, avoid explosive atmospheres, keep bystanders away.
Match plugs to outlets, avoid contact with earthed surfaces to reduce shock risk.
Stay alert, use PPE, prevent unintentional starting.
Instructions for installing and removing the battery cartridge from the tool.
Explains the protection system for batteries with a star marking.
Explains the electric brake feature and its service requirements.
Instructions for installing and removing drill bits and driver bits from the chuck.
How to install the optional driver bit holder on the tool.
Tips for best results when drilling into wood.
Methods to prevent slipping and tips for drilling in metal.
To Next Page
