Page 4 of 15
The regulator is equipped with:
✓ button for switching the regulator on and off [1],
✓ button disabling automatic stirrer / ventilator operation [2],
✓ button enabling manual operation of the stirrer / ventilator [3],
✓ digital temperature meter allowing for current temperature control, independently from
switching on or off the regulator [6],
✓ LEDs signaling the current operating status of the cooling / heating unit and the stirrer /
ventilator [7] [8] [9] [10]
✓ input for connecting the limit switch,
✓ control outputs, that is:
− chiller (unit) / heating system control output,
− stirrer / ventilator control output.
To Next Page
Loading...
