2
SPECIFICATIONS
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
Symbols
END001-1
The following show the symbols used for the
tool. Be sure that you understand their
meaning before use.
..............Only for EU countries
Do not dispose of electric
equipment together with
household waste material!
In observance of European
Directive 2002/96/EC on
waste electric and electronic
equipment and its implemen-
tation in accordance with
national law, electric equip-
ment that have reached the
end of their life must be col-
lected separately and
returned to an environmen-
tally compatible recycling
facility.
Intended use
The tool is intended for drilling and screw
driving in wood, metal and plastic.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is
72 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed
85 dB (A).
– Wear ear protection. –
The typical weighted root mean square
acceleration value is not more than 2.5 m/s
2
.
These values have been obtained accord-
ing to EN60745.
Model MT064 MT065
Capacities
Steel 10 mm 13 mm
Wood 25 mm 28 mm
Wood screw 6 x 75 mm 6 x 75 mm
Machine screw 6 mm 6 mm
No load speed
(min
-1
)
High 0 - 1,300 0 - 1,300
Low 0 - 400 0 - 400
Overall length 214 mm 225 mm
Net weight 2.0 kg 2.2 kg
Rated voltage D.C.14.4V D.C.18V
To Next Page
Loading...
