Need help?Do you have a question about the Mallinckrodt INOMAX DSir Plus and is the answer not in the manual?
Details the intended use and therapeutic application of the INOmax DSIR system for nitric oxide delivery.
Procedures for performing a leak test and automated purge of the system before patient use.
Details the steps for conducting the performance test to verify system accuracy.
Key operational considerations and warnings before connecting the INOmax DSIR to a patient.
Restricts system use to approved applications, patient populations, and conditions.
Guidelines for connecting the INOmax DSIR to various ventilator breathing circuits.
Instructions for operating the INOblender, including warnings for specific use cases.
Explains the function and activation of the integrated pneumatic backup for NO delivery.
Overview of different transport scenarios and recommendations for equipment.
Recommendations and equipment list for inter-hospital transport of INOmax DSIR system.
Detailed instructions for applying the transport regulator/cap assembly.
Lists high priority alarms, their possible causes, and recommended actions.
Procedure for performing automatic or manual low calibration using room air.
Steps for performing high calibration of the O2 sensor using 100% oxygen.
Procedure for high calibration of the NO sensor using calibration gas.
Procedure for high calibration of the NO2 sensor using calibration gas.
Detailed instructions for replacing the O2, NO, and NO2 sensors.
Steps to check for leaks in INOMAX regulators and cylinders using soapy water.
Lists ventilators and breathing systems validated for use with the INOmax DSIR in the US.
Details on NO delivery range, resolution, accuracy, pressure, and gas composition.
Step-by-step guide for connecting the injector module, cables, and gas lines.
Procedure for performing a high pressure leak test on the INOMAX cylinder and regulator.
Steps for manual purging and verifying system alarms during pre-use.
Tests the integrated pneumatic backup delivery function for NO delivery.
Procedure for testing the INOblender's functionality with the INOmax DSIR.
General| Brand | Mallinckrodt |
|---|---|
| Model | INOMAX DSir Plus |
| Category | Medical Equipment |
| Language | English |
To Next Page
