J. Maintenance
1. Clean extruder and nozzle frequently
2. Oil the X/Y/Z axis occasionally.
3. Preheat extruder properly before loading filament.
4. Calibrate extruder and platform every time before printing.
5. Keep platform clean and empty when idle.
6. Keep printer away from dust and grime.
7. Keep printer clean and dry.
8. Keep printer at a comfortable room temperature.
ZHANGZHOU ChangFeng Computer Equipment Co.,Ltd
ADDR.:No.437, Shengli Rd <w>.jinfeng Industrial Development
Area,ZHANGZHOU, FUJIAN, CHINA.
Tell:86-596-6106103
Website: www.malyansys.com/cn
Support: www.wiki.malyansys.com
To Previous Page
Loading...
