BOOST 200
6-in-1 POWER SUPPLY
with 200W inverter
200W Power Inverter
260 PSI Air Pressure Gauge
Charging Jack/Port
Air Compressor ON/OFF Switch
Battery Charging
Indicator LED
LED Work light
ON/OFF Switch
Battery Charge Status
Dial Gauge
Double Injection
Rubberized handle
LED Work light
12 VDC Socket with
Protective Dust Cover
12 VDC Socket with
Protective Dust Cover
Main Power LED Indicator
USB / Inverter Power Switch
USB power ON position —
Inverter Power LED Indicator
Double Injection Rubberized
Protective Padding
Battery Cable/Clamp—Negative
Battery Cable/Clamp
Positive
Main Booster
Power Switch
Inverter Blade Fuse
Compressor Air Hose
And Accessories
Compartment
Model No. 2032
Packaging includes
the following accessories:
110 VAC Charging adaptor
12 VDC Charging adaptor
Compressor Air Valve Accessories
Operating Instruction Manual
IMPORTANT INFORMATION
READ AND UNDERSTAND ALL WARNINGS AND THE ADVISORY NOTES INCLUDED IN THIS
MANUAL. FOLLOW INSTRUCTIONS PROVIDED BY YOUR VEHICLE MANUFACTURER AND MAN-
UFACTURER OF THE DEVICES INTENDED TO BE USED WITH THIS POWER SUPPLY.
MAKE CERTAIN THIS DEVICE IS FULLY CHARGED PRIOR TO FIRST USE.
WARNINGS
THIS PRODUCT CONTAINS A SEALED LEAD-ACID BATTERY AND MUST BE DISPOSED OF
PROPERLY. YOU MAY CONTACT YOUR LOCAL GOVERNMENT RECYCLING AUTHORITY FOR
APPROPRIATE DISPOSAL. FAILURE TO FOLLOW THE INSTRUCTIONS MAY CAUSE DAMAGE
TO THE PRODUCT AND OR PERSONAL INJURY.
USB Port 2100mA
Inverter Power Switch
Inverter power ON position =
USB power ON position —
Inverter power ON position =
Power OFF position
Sheet 1 of 9
To Next Page
Need help?
General