3) Be careful not to damage the
rangefinder coupling lever and the
shutter cocking lever at the rear of
4)When mounting the 43mm or 65mm
wide angle lenses make sure that the
rear lens rims do not touch the
rangefinder coupling roller.
Position the front face of the lens which has
been removed as shown in the photo.
1. Set the shutter speed dial at A (Auto
Exposure) position. When the power is
turned on and the shutter release button is
touched slightly, the shutter speed is
indicated on the lower part of the
viewfinder.
1) When the shutter speed LED lights on,
the battery power is normal.
2) Blinking light of the shutter speed LED
indicates drop of the battery power below
the allowable level. Then replace the
battery.
3) No light or blinking light of the red
warning lamp on the lower left side of the
viewfinder indicates depletion of the
power, so that camera will not work.
To Next Page
Loading...
