Mamiya C33 Professional - Picture Taking; Ground Glass Indicators; Parallax Correction Lever Use

CHANGING FOCUSING
HOOD
1. The focusing
hood
can be easily
removed
by
loosening
the
lock
screw
@
and
lifting
up
the rear end of the assembly.
2.
To mount, match
the
groove
on the
front
side of the
hood to the
two
pins
on
the body;
match the rear
groove
to
the lock
screw
@
and tighten.
(Fig.
LT)
PICTUR,E TAKING
With
this camera, ?r exposure
index
and
ground
glass.
The indicator
needle starts
while
the
focusing
knob
is
being
operated.
index
and
parallax.
In this instance,
the
index
shown
on the lens
being used.
a
parallax
correction scale are
provided
on the
to appear in the upper
part
of
the
ground
glass
Position
of this
indicator needle
shows
the
exposure
parallax
correction lever
@
must
be set at the
EXPOSURE
INDEX
SCALE
As the distance
between
the lens and film
becomes
greater,
the light value
will
be
lower
provided
the aperture is constant. In this case,
the exposure must
be increased.
I;irst, take
a
light meter reading to obtain the exposure and
make the correction based on
the exposure
index
given
by the
camera.
www.orphancameras.com