Maintenance and care
22
Changing oil filter
Remove filter cartridge using tape wrench.
Use a vessel of sufficient size to ensure
that the oil does not overflow.
Danger:
The filter cartridge is filled with
hot oil - risk of burning and scal-
ding!
Lightly oil the seal (arrow) of the new filter.
Screw on filter cartridge by hand until seal
is in contact.
Continue to turn filter cartridge by hand for
approx. a further 3/4 revolutions until it
sits firmly.
Add engine oil, let engine run for a short
time and check for leaks.
Tighten filter cartridge by hand if neces-
sary.
Fit a new disposable filter at every oil
change.
Caution:
Used oil filters are classed as dange-
rous waste and must be disposed of
accordingly.
To Next Page
Loading...
Need help?
General
