EasyManua.ls Logo

Man D 0824 LE 201

Man D 0824 LE 201
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance and care
31
Turbocharger
At every engine oil change check the oil pipes for leaks and constrictions.
Furthermore, a regular check should be kept on charge air and exhaust gas pipes.
Any leakages should be attended to at once because they are liable to cause over-
heating of the engine.
Starter motor
Check that the electric cables are properly fastened and that contacts and plug con-
nections are secure.
In engines fitted with electronic speed pickups at the gear ring (electronic speed gov-
ernor), the speed pickup are to be cleaned too and metal chips that may adhere are to
be removed.
Note:
Always disconnect the battery earth cable before starting work on the electrical sys-
tem. Connect up the earth cable last, as there is otherwise a risk of short-circuits.
Temporary decommissioning of engines
Temporary anti-corrosion protection according to MAN works norm M 3069 is required for
engines which are to be put out of service for fairly long periods.
The works norm can be obtained from our After-Sales Service department Nuremberg
works.

Related product manuals