Commissioning and operation
33
Display in BAR Display in PSI
> (BAR) < (PSI)
After selection and acceptance, all the settings for language and unit have been con-
cluded and highlighted accordingly in black. The selection cursor jumps to the second
last line to the item “exit”:
>exit< back set-time service
If this is confirmed using the Enter function (PRG key
Prg
) or you cancel at this point
using the Escape function (Menu key
ALARMS
Men
), you return with the currently marked mode
to the normal display function. In the event of an input error, you can use the function
“back” to repeat the input. The selection cursor jumps back to the initial position (lan-
guage selection).
Setting the time
First, the selection cursor must be placed in the second last line. To do so, the current
language and unit settings are confirmed each time with the key
Prg
. The selection
cursor can now be positioned using the +− keys
TEST
RESET
to “set-time”.
exit back > set-time < service
The function is called up using the PRG key
Prg
.
A new page is opened and the current time (time / date) is displayed.
The selection cursor jumps to “Hour”.
set-time hour minute second
time (H:M:S) >13< : 29 : 56
day month year
date (D:M:Y) 27 : 06 : 00
If nothing is to be changed, you can cancel using the Menu key
ALARMS
Men
. Otherwise, the
setting is made using the +− keys
TEST
RESET
and the PRG key
Prg
in the order Hour,
Minute, Second, Day, Month and Year. A correctly specified time or date is confirmed
using the PRG key
Prg
and the selection cursor jumps to the next value. The year is
given last, and the selection cursor jumps to the second last line to the item “exit”; the
time setting is now concluded.
To Next Page
Loading...
Need help?
General