General Safety Instructions
MAN-Industrial diesel engines D2842 LE103
19
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Hot Surfaces
CAUTION!
Risk of burns caused by hot surfaces!
Contact with hot components can cause burns.
For this reason:
S When performing any work in the vicinity of hot components always wear protective cloth
ing and protective gloves.
S Before starting any work ensure that all components have cooled down to ambient tem
perature.
Noise
WARNING!
Risk of hearing damage caused by noise!
The level of noise occurring in the working area can cause serious damage to hearing.
For this reason:
S Always wear hearing protection when working.
S Do not unnecessarily remain in the hazard area. Leave hazard area when work is fin
ished.
Sharp Edges and Corners
CAUTION!
Risk of injury cause by sharp edges and corners!
Sharp edges and corners can cause cuts and scrapes to the skin.
For this reason:
S Always work carefully and with caution in the vicinity of sharp edges and corners.
S In cases of doubt, wear protective gloves.
Dirt and Objects
CAUTION!
Risk of tripping caused by dirt and objects!
Dirt and objects can cause a person to slip or trip which can cause considerable injuries.
For this reason:
S Always keep the work area clean.
S Remove any objects that are no longer necessary.
S Mark areas where there is a danger of tripping with yellow and black striped tape.
To Next Page
Loading...
Need help?
General
