Operation
MAN-Industrial diesel engines D2842 LE103
45
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
7.3.5 Refilling Engine Oil
IMPORTANT!
Termination of liability for material defects by use of non-approved fluids and lubric
ants!
Liability of material defects is terminated if non-approved fluids and lubricants are used.
For this reason:
S Only use approved fluids and lubricants (see “Fluids and Lubricants ..." publication).
IMPORTANT!
Component damage caused by
over filling!
Engine damage can occur if engine
oil is filled to above the max. mark
on the oil dipstick.
For this reason:
S Do not fill engine oil above the
max. mark on the oil dipstick
MIN
MAX
1. Remove cap (1).
2. Slowly fill engine oil into the filler neck.
The oil level should be between both marks on the
dipstick.
3. Reinstall cap (1).
4. Check engine oil level.
1
To Next Page
Loading...
Need help?
General
