Technical Data
MAN-Industrial diesel engines D2842 LE103
77
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Engine lubrication Force feed lubrication
Oil capacity in oil sump (litres)
min. max.
24 l 32 l
Oil change quantity (with filter) 35 l
Lubrication oil pressure during operation (depending on engine speed, oil temperature and engine
loading) must be monitored by the oil pressure monitor / -indicator units
Oil filter Full-flow filter with 2 paper filter elements
Engine cooling system Liquid cooling
Operating temperature 80-90_C, 95_C permissible temporarily
Electrical equipment
Starter 24 V; 9 KW
Alternator 28 V; 140 A
To Next Page
Loading...
Need help?
General
