Positioning the ELK
• Place the patient in the recovery position if
they are unable to transfer themselves onto the
ELK.
• Unroll the ELK by unclipping the ap (A g.1)
from the ends of the stability bar (B).
• Remove the end cap and then the stability bar
from its pocket (B g. 2) in order to provide a
more comfortable transfer for the patient.
• Fold the edge of the ELK underneath itself, by
folding along the line of the stability bar pocket
(g. 3).
• Position the ELK so that its ‘upper’ edge is
approximately level with and tight up against
the patient’s waistband (g.4). NOTE: Place a
blanket, groundsheet, towel or similar under
the ELK if using it on a rough surface.
A
B
B
English
1
2
3
4
To Next Page
Loading...
