Why Mangar airflo compressor keeps stopping when trying to inflate the lifting aid?
This issue may occur if there are kinks in the air hose, so check the hose. Also, ensure that the ‘Normal/High’ air flow switch is in the ‘Normal’ position.
What to do if the top two lights on the Battery Gauge are flashing on Mangar airflo?
This indicates that the overload cut-out has tripped. To resolve this, press any button to reset the system.
What to do if ‘Auto’ light is flashing on Mangar airflo Medical Equipment?
The flashing ‘Auto’ light indicates that the compressor’s internal temperature cut-out has tripped. Allow the Airflo to cool down for 15 minutes.
How to resolve Mangar airflo compressor not running when lever hand control is moved?
First, ensure that the ‘Auto Function’ has been selected. Also, verify that the built-in buttons have not been locked.
What to do if Mangar airflo compressor causes electrical interference?
To mitigate electrical interference, increase the distance between the compressor and the other electrical equipment until the interference ceases.
What to do if built-in buttons do not respond on Mangar Medical Equipment?
Ensure that the built-in buttons have not been locked.
General| Brand | Mangar |
|---|---|
| Model | airflo |
| Category | Medical Equipment |
| Language | English |
Instructions on how to connect the air hose to the Airflo compressor.
Details the 60-second function for 'Up'/'Down' buttons and how to cancel it.
Procedure to lock and unlock the built-in control buttons to prevent accidental use.
Explains connecting and using the push-button hand control for raising and lowering.
Details connecting and operating the lever hand control for raising, lowering, and stopping.
Instructions for connecting and using CAMEL and ELK hand controls with numbered buttons.
Guidance on inspecting the air filter and replacing batteries, with important safety notes.
To Next Page
