Manitou 120 SC-2 User Manual

2-28
23- MACHINE TILT BUTTON, WITH INDICATOR: OPERATION AT REDUCED SPEED ON A SLOPE
- Press this button to select the use of reduced speed on a slope.
24- GREED POWER FEED INDICATOR / RED FAULT BUTTON
- The green indicator light comes on when the red Emergency Stop knob is pulled into the ON
position.
- If the red fault light is lit, push and the pull the red Emergency Stop knob to initialise the
system. If the light remains red, report the machine and take it out of service.
25- RED EMERGENCY STOP KNOB
- Push the red Emergency Stop knob to the OFF position to stop all the functions and to switch
off the engine. Pull the red Emergency Stop knob to the ON position to use the machine.
- Repair any function that is active when one of the Emergency Stop knobs is pressed.
26- FUNCTION CONFIRMATION SWITCH
- Hold down the function confirmation switch to activate the translation function.
23
24
25
26
647367 (01/03/2017) 100/120 SC-2 / 140 SC

Manitou 120 SC-2 Specifications

General

Brand	Manitou
Model	120 SC-2
Category	Lifting Systems
Language	English