Owner’s Manual
© 2020 Manitou Pontoon Boats
Electrical Equipment
In this section, you will learn more about your Manitou’s onboard
electrical systems, including instruments, controls, wiring, and other
components.
Please note that some items described in this section may not be present
on your Manitou model. This section provides a general overview of
onboard equipment. For more detailed information, check with your
Manitou dealer.
Electrical Wiring System
All systems on your boat are powered by a 12-
volt DC negative ground el
ectrical system. This
system has been fully inspected at the Manitou
factory. It is recommended that any work
involving adding electrical equipment to your
boat be completed by your Manitou dealer.
Incorrect wiring of electrical circuits can result
in fire and damage to your boat’s electrical
system.
All Manitou models, with the exception of the
Aurora LE and Aurora Angler LE models have a
fuse block, as pictured.
Maximus DCM
The XT and LX models are
equipped with a digital
switching system. This
system, located under the
helm, allows the user to
control, monitor, and trouble-
shoot the electronics of the
boat through the display.
More information about the
Maximus DCM can be found
in your owner’s package.
36
©2021 Manitou Pontoon Boats
To Next Page
Loading...
Need help?
General
