Owner’s Manual
© 2020 Manitou Pontoon Boats
Note: The appearance of the docking and navigation lights on your boat
may differ from those shown here.
Docking Lights
Docking lights are intended to be used only while you are docking the
boat at night. Do not use these lights while cruising on the water. The
lights are very bright, and may temporarily blind other drivers.
Anchor Light
The anchor light is a white light located on the top of your bimini, sport
arch, or tower. Use this light while your boat is anchored on the water
after dark so that other boaters can see your boat. It must also be used
while the boat is underway
after dark, with the three
position Anchor/ Navigation
switch set to the navigation
position. While at rest, with the
anchor down, set the switch to
the anchor setting. Once
underway again, return the
switch to the navigation
position.
Note: It is important to
know and follow all laws
related to the use of the
anchor light.
Switches
Electrical switches control the supply of power to your boat’s
components. Switches may be two-position (either on or off), or three-
position (in which the center position is off). On a three-position switch,
the switch position determines which components are activated.
Some switches have an adjacent push-button reset breaker, and others
have automotive-style fuses mounted inside the helm. These breakers
and fuses protect the electrical components from damage by power
surges.
38
©2021 Manitou Pontoon Boats
To Next Page
Loading...
Need help?
General
