Manitou MHT 7140 T-E3 User Manual

5-4
CONTROL PANEL DESCRIPTION
It gives to the operator all information in order to work in safe conditions and allows correct setting.
1 - Symbols identifying the operating modes of the machine (frontal on tyres).
The selections are made automatically.
2 - Identification symbols of the attachments (manual selection via the panel using the Ahkey).
3 - Green/Yellow/Red indicator lights signalling the operating status (safety/alarm/block).
4 - Alphanumerical LCD display showing the operating data.
5 - Symbols and letters concerning the indications provided by the display.
6 - Icon depicting the machine and the letters of the geometric data displayed.
7 - Contrast regulating key.
8 - Key for selecting the speed of the hydraulic movements: standard or slow.
9 - Key for selecting the type of attachment (amongst those installed).
10 - Key for confirming the attachment and contrast value.
5.8
5.9
4.3
34
1.8
- .3
2A
1
9 8
3
5
4
7
10
6
1
2

Manitou MHT 7140 T-E3 Specifications

General

Brand	Manitou
Model	MHT 7140 T-E3
Category	Lifting Systems
Language	English