4-64-6
HANHANDD LOCLOCKINKINGG
-- TTake the locking piake the locking pin and the clip n and the clip on the bracket (fion the bracket (fig. A) and log. A) and lock the attachment ck the attachment (fig.(fig. D).D).
Do not forget to refit the clip.Do not forget to refit the clip.
HANHANDD RELRELEASEASINGING
-- Proceed in the reverse order of paragraProceed in the reverse order of paragraph HAND LOCKING while mph HAND LOCKING while making sure you put backaking sure you put back
the locking pin and the clip in the bracket (fig. A).the locking pin and the clip in the bracket (fig. A).
LALAYINGYING ANAN AATTTTACHMEACHMENTNT
-- Proceed in the reverse order of paragraph TAKING UP AN ATTProceed in the reverse order of paragraph TAKING UP AN ATTACHMENT while making sureACHMENT while making sure
you place the attachment flat on the ground and you place the attachment flat on the ground and in closed position.in closed position.
BB
CC
DD
B -
B - HYDRAULIC ATTHYDRAULIC ATTACHMENT AND ACHMENT AND MANUAL LOCKING DMANUAL LOCKING DEVICEEVICE
TTAKIAKINGNG UPUP ANAN AATTTTACHACHMENMENTT
-- Ensure that the attachment is in a positioEnsure that the attachment is in a position facilitating the locking to the carriage. If it isn facilitating the locking to the carriage. If it is
not correctly oriented, take the necessarnot correctly oriented, take the necessary precautions in order to move it safely.y precautions in order to move it safely.
- Check that the locking pin and the - Check that the locking pin and the clip are in position in the bracket (fig. A).clip are in position in the bracket (fig. A).
-- Place the lift truck with the jib fully lowered in front of and parallel to the attachmentPlace the lift truck with the jib fully lowered in front of and parallel to the attachment, tilt, tilt
the carriage forwards (fig. B).the carriage forwards (fig. B).
-- Bring the carriage under the locking tube of the attachment, slightly lBring the carriage under the locking tube of the attachment, slightly lift the jib, incline theift the jib, incline the
carriage backwards in order carriage backwards in order to position the attachment (fig. C).to position the attachment (fig. C).
- Lift the attachment of- Lift the attachment off the ground to facilitate locking.f the ground to facilitate locking.
MAMANUNUALAL LOLOCKCKININGG ANANDD COCONNNNECECTITIONON OFOF THTHEE AATTTTACACHMHMENENTT
-- TTake the locking piake the locking pin and the clip n and the clip on the bracket (fion the bracket (fig. A) and log. A) and lock the attachment ck the attachment (fig.(fig. D).D).
Do not forget to refit the clip.Do not forget to refit the clip.
AA
BB
To Next Page
Loading...
