11
Installation of the
AR-40000 System
• Locate position to mount
filter system. Be sure to
leave 2 inches under the
filter cartridges to allow for
cartridge change-out.
• Use a level to be sure that
the system hangs evenly.
• Place the bottom of
mounting bracket on the
leveled line. Mark top and
bottom mounting holes.
• Drill top and bottom
mounting holes.
At least 2” gap
for all
cartridges
Installation of the
AR-40000 System
• Install bottom mounting
screws. Slide key hole
slots down onto the
screws.
• Install top mounting
screws
• Tighten all 4 mounting
screws.
• Install manifold cover,
using the 4 sheet
metal screws
provided.