2-2
Component Identification & Removal
Top Cover
For easiest access to the evaporator compartment, the top cover
can be removed.
1. Remove two screws on the rear of the ice machine.
2. Slide top cover back to disengage the three pins from the
front panel.
Bin Door
Allows access to the storage bin.
1. Remove top cover.
2. Slide door up until rear pins align with slot in door tracks.
3. Lift rear door pins out and slide door up until front door
pins align with slot
4. Lift door out of door track.
REMOVE TWO SCREWS – SLIDE
COVER BACK TO REMOVE
ALIGN DOOR PINS WITH TRACK SLOTS, THEN LIFT
DOOR OUT OF TRACK
To Next Page
Loading...
