Need help?Do you have a question about the Manitowoc EC Series and is the answer not in the manual?
General recommendations and warnings for ice machine installation.
Explains how to interpret the model numbers and their components.
Criteria for selecting a suitable location for the ice machine.
Step-by-step guide for correctly leveling the ice machine.
Requirements for electrical connections, including voltage and circuit protection.
Guidelines for connecting water supply and drain lines.
Specifications for water inlet, drain connections, and tubing.
Table detailing physical dimensions and connection port locations for models.
A comprehensive list of checks to perform before starting the ice machine.
Final operational readiness checks and important warnings before initial use.
Instructions for removing the top cover for access.
Instructions for removing the bin door for access.
Instructions for removing and reinstalling the water curtain.
Instructions for removing and reinstalling the ice chute.
Instructions for removing and reinstalling the spray bar.
Instructions for removing and reinstalling the sump drain overflow tube.
Instructions for removing the door frame assembly.
Steps for priming the system and initial water filling.
Description of the ice making process, layer by layer.
Description of the ice release process and cycle completion.
How the machine stops when the ice bin is full.
Essential checks to ensure proper operation before use.
Procedure to adjust ice cube thickness for desired size.
Information on standard vs. large cube weight and appearance.
Overview of maintenance tasks, frequency, and responsible parties.
Instructions for cleaning the condenser for optimal performance.
Specific steps for cleaning the air-cooled condenser fins.
Notes on cleaning water-cooled condensers and regulating valves.
General guidelines for cleaning and sanitizing the ice machine interior.
Detailed steps for removing lime scale and mineral deposits.
Detailed steps for removing algae and slime from the interior.
How to clean the outside of the ice machine for cleanliness.
Procedures for preparing the machine for extended non-use or freezing conditions.
Specific winterization steps for air-cooled models.
Specific winterization steps for water-cooled models.
Troubleshooting guide to diagnose and correct common operating problems.
Outline of warranty terms, parts, and labor coverage.
List of items and situations not covered by the ice machine warranty.
Details about the manufacturer, including address and representative.
Lists relevant standards and EC directives the product complies with.
To Next Page
General