24 Part Number 040005626 5/17
Electrical Requirements
Voltage
The maximum allowable voltage variation is ±10% of
the rated voltage on the ice machine model/serial
number plate at start-up (when the electrical load is
highest).
Fuse/Circuit Breaker
A separate fuse/circuit breaker must be provided for
each ice machine.
Total Circuit Ampacity
The total circuit ampacity is used to help select the
wire size of the electrical supply.
The wire size (or gauge) is also dependent upon
location, materials used, length of run, etc., so it must
be determined by a qualified electrician
Refer to ice machine data plate, for electrical
requirements. The ice machine data plate information
overrides all other published data.
All wiring must conform to local, state and national
codes.
The ice machine must be grounded in accordance
with national and local electrical code.
To Next Page
Loading...
Need help?
General