Part Number 040005626 5/17 31
Step 3 To start a cleaning cycle, move the toggle
switch to Clean. Water will flow through the water
dump valve and down the drain. Wait until the water
trough refills, then add the proper amount of ice
machine cleaner to the water trough.
Step 4 Wait until the clean cycle is complete
(approximately 24 minutes) then place the toggle
switch in the off position and disconnect power and
water supplies to the ice machine.
Step 5 Remove parts for cleaning.
Refer to the proper parts removal for your machine.
Continue with step 6 when the parts have been
removed.
Do not mix Ice Machine Cleaner and Sanitizer
solutions together. It is a violation of Federal
law to use these solutions in a manner
inconsistent with their labeling.
Model Amount of Cleaner
M0420 3 ounces (90 ml)
M0500 M0700 M1000 5 ounces (150 ml)
M1400 9 ounces (265 ml)
To Next Page
Loading...
Need help?
General