OPERATING CONTROLS 1400H OPERATOR AND SERVICE MANUAL
2-24 Published 10-30-2014 Control # 040-09
12. Exit the cab, lock the door, and stow the access ladder.
13. Secure any loads or lifting devices on truck bed or body.
14. Ensure tires are properly inflated.
15. Disengage the Power Take Off (PTO) and start truck
from the truck cab.
16. Release the park brake before moving truck.
FIGURE 2-1
Wedge socket with
bracket to support the
anti-two-block weight.
There needs to be slack
in the anti-two-block chain
in preparation for road
travel.
To Next Page
Loading...
