Manitowoc S model Installation Manual

Insulation Requirements
3/8 inch
(9.5 mm)
5/8 inch
(15.9 mm)
3/4” (19mm) Suction Line
1/4” (7mm) Liquid Line
5/8 inch
(15.9 mm)
7/8 inch
(22.2 mm)
1/2”(13mm) Suction Line
1/4” (7mm) Liquid Line
1/2 inch
(12.7 mm)
3/4 inch
(19.1 mm)
Min. Insulation
Thickness
Liquid Line Suction Line
The following insulation requirements prevent condensation at
90°F (32.2°C) ambient 90% Relative Humidity. If higher
humidity is expected, increase insulation thickness.

Manitowoc S model Specifications

General

Brand	Manitowoc
Model	S model
Category	Ice Maker
Language	English