Maintenance Section 4
4-2
Part Number 000000966 03/09
Manitowoc’s Cleaning Technology
Manitowoc Ice Machines include technology that allows
the initiation and completion of a cleaning cycle at the
flip of a switch. This cycle will permit cleaning of all
surfaces that come in contact with the water distribution
system. Periodic maintenance must be performed that
includes sanitizing the bin and adjacent surface areas,
which are not contacted by the water distribution system.
Depending on local water conditions Manitowoc
recommends initiating preventative maintenance
cleaning procedures between the 6 month cleanings.
This preventive maintenance removes mineral build-up
from the evaporator, which results in peak efficiency and
lower operating costs.
This technology allows initiation and completion of a
clean cycle, after which the ice machine automatically
starts ice making again.
Manitowoc recommends disassembling, cleaning and
sanitizing the ice machine and dispenser every six
months
This Manitowoc Ice Machine has two separate cleaning
procedures.
Cleaning/Sanitizing Procedure
This procedure must be performed a minimum of once
every six months.
• The ice machine and bin must be disassembled
cleaned and sanitized
• All ice produced during the cleaning and sanitizing
procedures must be discarded
• Removes mineral deposits from areas or surfaces
that are in direct contact with water
Heavily Scaled Cleaning Procedure
Perform this procedure if you have some or all of these
symptoms.
• Ice machine stops on Safety Shutdown
• Your water has a high concentration of minerals
• The ice machine has not been on a regular
maintenance schedule.
To Next Page
Loading...
Need help?
General