Manitowoc SM50 series User Manual

Part Number 80-01111-9 7/10 65
Step 12 Use half of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and
bin. Use a cloth or sponge to liberally apply the
solution. When sanitizing, pay particular attention to
the following areas:
• Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 13 Replace all removed components.
Step 14 Reapply power and water to the ice machine
and place the toggle switch in the WASH position.
Step 15 Add the proper amount of Manitowoc Ice
Machine Sanitizer to the water trough.
Step 16 Wait until the sanitize cycle is complete
(approximately 45 minutes) then place the toggle
switch in the OFF position, disconnect power and
water supplies to the ice machine.
Step 17 Repeat step 6 to remove parts for hand
sanitizing.
Step 18 Mix a solution of sanitizer and warm water.
Step 19 Use half of the sanitizer/water solution to
sanitize all removed components. Use a cloth or
sponge to liberally apply the solution to all surfaces of
the removed parts or soak the removed parts in the
sanitizer/water solution. Do not rinse parts after
sanitizing.
Model Amount of Sanitizer
QM20/QM30 45 ml
! Warning
Disconnect electric power to the ice machine
at the electric switch box before proceeding.
Solution Type Water Mixed With
Sanitizer 23L. (6 gal )
120 ml (4 oz)
sanitizer

Manitowoc SM50 series Specifications

General

Brand	Manitowoc
Model	SM50 series
Category	Ice Maker
Language	English