Part Number 000014797 Rev02 05/18 33
Step 7 Mix a solution of sanitizer and warm water.
Solution Type Water Mixed With
Sanitizer 3 gal. (12 l) 2 oz (60 ml) sanitizer
Use half of the sanitizer/water solution to sanitize all
removed components. Use a spray bottle to liberally apply
the solution to all surfaces of the removed parts or soak
the removed parts in the sanitizer/water solution. Do not
rinse parts after sanitizing.
Step 8 Use half of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and bin.
Use a spray bottle to liberally apply the solution. When
sanitizing, pay particular attention to the following areas:
• Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 9 Replace all removed components, wait 10
minutes, then reapply power and water to the ice machine
Step 10 Select Clean. Water will flow through the water
dump valve and down the drain. Wait until the water
trough refills, then add the proper amount of ice machine
sanitizer to the water trough.
Model Amount of Sanitizer
U0140/UF0140 1 ounces (30 ml)
U0190/UF0190 2 ounces (60 ml)
U240/UF0240 2 ounces (60 ml)
U310/UF0310 2 ounces (60 ml)
Wait until the sanitize cycle is complete (approximately 22
minutes) then press the Ice button to start ice making.
To Next Page
Loading...
Need help?
General