Manitowoc UG030A Technician's Handbook

22
WATER-COOLED ICE MACHINES
1. Perform steps 1-6 under “Air-Cooled Ice
Machines.”
2. Disconnect the incoming water and drain lines
from the water-cooled condenser.
3. Insert a large screwdriver between the bottom
spring coils of the water regulating valve. Pry
upward to open the valve.
4. Hold the valve open and blow compressed air
through the condenser until water no longer exits.

Manitowoc UG030A Specifications

General

Brand	Manitowoc
Model	UG030A
Category	Ice Maker
Language	English