EasyManua.ls Logo

Manitowoc UG080A User Manual

Manitowoc UG080A
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Part Number: 040003628 Rev. 01 01/14/18
UG Series Ice Machine
Installation, Operation and Maintenance Manual
This manual is updated as new information and models are released. Visit our website for the latest manual.
,
Caution
Read this instruction before operating this equipment.
Original Document

Other manuals for Manitowoc UG080A

Question and Answer IconNeed help?

Do you have a question about the Manitowoc UG080A and is the answer not in the manual?

Manitowoc UG080A Specifications

General IconGeneral
ModelUG080A
TypeUndercounter Ice Maker
Ice TypeCube
Condenser TypeAir-Cooled
Voltage115V
RefrigerantR-404A
Ice Production Capacity80 lbs/day
Power Supply115V/60Hz
Water Usage4.5 gallons per 100 lbs of ice

Summary

General Information

Model Identification

Lists model numbers and explains the model number identification system.

Location of Model/Serial Number

Specifies where to find the model and serial number decals on the unit.

Warranty and Service Information

Details warranty coverage, exclusions, and procedures for authorized service.

Installation Instructions

General Installation and Dimensions

Provides general installation advice and physical dimensions for ice machines.

Site Selection and Leveling

Guidelines for choosing a location and leveling the ice machine properly.

Electrical and Water Connections

Covers electrical service requirements and water supply/drain connections.

Installation Checklist and Pre-Operation

Final checks before starting the ice machine and a comprehensive installation checklist.

Operation

Component Identification

Identifies key components of the ice machine.

Component Removal Procedures

Instructions for removing the top cover, bin door, water curtain, ice chute, and spray bar.

Ice Making Sequence

Step-by-step process of the ice making cycle from start-up to shut-off.

Operational Checks and Cube Shape

Procedures for checking cube thickness and shape for optimal performance.

Maintenance

General Maintenance Schedule

Overview of maintenance tasks and their recommended frequencies for users and technicians.

Condenser Cleaning

Procedures for cleaning air-cooled and water-cooled condensers.

Interior Cleaning and Sanitizing

Step-by-step guide for cleaning and sanitizing the inside of the ice machine.

Exterior Cleaning and Winterization

Instructions for cleaning the exterior and preparing the machine for service removal or winter.

Before Calling for Service

Troubleshooting Checklist

A guide to diagnose and resolve common ice machine problems before calling for service.