Manitowoc UYF0310A User Manual

260 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Part Number 000014797 Rev02 05/18

Undercounter Ice Machines

Technician’s Handbook

This manual is updated as new information and models are

released. Visit our website for the latest manual.

www.manitowocice.com

Table of Contents

Default Chapter3
- Safety Notices3
- Table of Contents9
General Information17
- Model Numbers17
- How to Read a Model Number19
- Ice Machine Warranty Information19
Installation21
- Location of Ice Machine21
- Ice Machine Clearance Requirements22
- Ice Machine Heat of Rejection22
- Leveling the Ice Machine23
- Electrical Requirements24
- Electrical Specifications24
- Water Service/Drains26
  - Water Supply26
  - Cooling Tower Applications27
Maintenance29
- Cleaning and Sanitizing Procedure29
- U240, U31029
- Cleaning and Sanitizing Procedure UDE06544
  - Cleaning the Condenser50
  - Removal from Service/Winterization51
- Cleaning and Sanitizing Procedure UDE08052
  - Cleaning the Condenser63
  - Removal from Service/Winterization64
Sequence of Operation U0140/UF0140/U019065
Uf0190/U240/Uf240/U310/Uf31065
- Touch Pad Features65
Ice Making Sequence of Operation68
- Control Board Revisions68
- Software Revisions68
- Sequence of Operation69
- Control Board Timers71
- Safety Limits72
- U310/UF310 Energized Parts Chart74
Operational Checks76
- Ice Thickness Check76
- Ice Thickness Adjustment76
- Minimum/Maximum Slab Weight77
Sequence of Operation UDE06578
- UDE065 Energized Parts Chart80
- Ice Thickness Adjustment81
Sequence of Operation UDE08082
- UDE080 Energized Parts Chart84
Operational Checks UDE08086
- Siphon System86
- Water Level86
- Water Level Check87
- Ice Thickness Check88
Troubleshooting89
- Troubleshooting U0140/UF0140/U019089
- Uf0190/U240/Uf240/U310/Uf31089
Troubleshooting UDE065130
- Diagnosing an Ice Machine that will Not Run130
- Refrigeration Diagnostics Overview UDE065131
- Normal Operation132
- Ice Production Check134
- Installation/Visual Inspection Checklist136
- Water System Checklist137
UDE065 Refrigeration Diagnostics138
- Flooding Expansion Valve Symptoms139
- Starving Expansion Valve/Low Refrigerant139
- Charge Symptoms139
- Overcharged System Symptoms139
- Analyzing Ice Formation Pattern140
- Analyzing Discharge Line Temperature142
- Analyzing Suction Line Temperature144
- Comparing Evaporator Inlet/Outlet147
- Temperatures147
- Discharge Line Temperature Analysis148
- Harvest Valve150
Troubleshooting UDE080154
- Diagnosing an Ice Machine that will Not Run154
- Safety Limit Feature155
- Diagnosing Ice Thickness Control Circuitry160
- Ice Production Check162
- Installation/Visual Inspection Checklist164
- Water System Checklist165
- Flooding Expansion Valve Symptoms167
- Starving Expansion Valve/Low Refrigerant167
- Charge Symptoms167
- Overcharged System Symptoms167
- Analyzing Ice Formation Pattern168
- Analyzing Discharge Line Temperature170
- Analyzing Suction Line Temperature172
- Comparing Evaporator Inlet/Outlet175
- Temperatures175
- Discharge Line Temperature Analysis176
- Harvest Valve178
Component Check Procedures183
- Main Fuse183
- Bin Switch184
- Uf240/U310/Uf310186
- Touch Pad186
- U310/Uf310188
- Float Switch188
- U310/Uf310190
- Water Trough Thermistor190
- Bin Thermostat192
- Ude065192
- Liquid Line Thermistor193
- Ude065193
- ON/OFF/WASH Toggle Switch195
- Ude065/Ude080195
- Compressor Electrical Diagnostics196
- Fan Cycle Control198
- Uf240/U310/Uf310198
- High Pressure Cutout (HPCO) Control199
- Uf240/U310/Uf310199
Filter-Driers200
Refrigerant Recovery/Evacuation201
- Definitions201
- Refrigerant Re-Use Policy202
- Recovery and Recharging Procedures204
- U310/Uf310204
- Recovery and Recharging Procedures207
- Ude065/Ude080207
System Contamination Cleanup210
- Determining Severity of Contamination210
- Mild System Contamination Cleanup212
- Procedure212
- Severe System Contamination Cleanup213
- Procedure213
- Replacing Pressure Controls Without214
- Removing Refrigerant Charge214
Total System Refrigerant Charge216
- Cycle Times, 24 Hr. Ice Production and Refrigerant Pressure Charts217
- UDE065 Operating Temperatures218
- UDE080 Self-Contained Air-Cooled220
- UDE080 Operating Temperatures221
- U0140/UF0140 Self-Contained Air-Cooled222
- U0140 Self-Contained Water-Cooled223
- U0190/UF0190 Self-Contained Air-Cooled224
- U0240/UF0240 Self-Contained Air-Cooled225
- U0240/UF0240 Self-Contained Water-Cooled226
- U0310/UF0310 Self-Contained Air-Cooled227
- U0310/UF0310 Self-Contained Water-Cooled228
Wiring Diagrams229
- UDE065 Wiring Diagram230
- UDE080 Wiring Diagram232
- Water233
- U0140/U0190/U0240 Wiring Diagram236
- With J4 Thermistor Terminal - 1Ph Air/Water236
- U0140/U0190/U0240 Wiring Diagram237
- U0140/U0190/U0240 Wiring Diagram238
- Prior to Thermistor Terminal - 1PH Air/Water238
- U0140/U0190/U0240 Wiring Diagram239
- UF0310 Wiring Diagram 1PH Air/Water240
- U0310 Wiring Diagram with J4 Thermistor Terminal - 1Ph Air/Water242
- U0310 Wiring Diagram243
- U0310 Wiring Diagram Prior to Thermistor Terminal - 1PH Air/Water244
- U0310 Wiring Diagram245
Electronic Control Boards246
- Electronic Control Board UF Models246
- Electronic Control Board U Models with J4248
- Thermistor Terminal248
- Electronic Control Board U Models Prior to250
- Thermistor Terminal250
- Electronic Control Board UDE065252
- Electronic Control Board UDE080254
Tubing Schematics256
- Tubing Schematic - UDE065256
- Tubing Schematic - UDE080/U0140/UF0140257
- Tubing Schematic - U0190/UF0190/U0240257

Questions and Answers:

M
Michael AdamsAug 13, 2025
How to troubleshoot a Manitowoc UYF0310A that does not operate?
- J
  Jonathan RamirezAug 13, 2025
  If your Manitowoc Ice Maker isn't operating, there could be several reasons. First, check the power supply: ensure the machine is plugged in, the main switch is on, the breaker hasn't tripped, and the fuse is intact. If power isn't the issue, make sure the ice machine is turned on by pressing the On/Off button. Lastly, confirm that the damper is in the upright position and can swing freely.
A
Andrew GibsonAug 17, 2025
Why is my Manitowoc Ice Maker producing low ice capacity?
- L
  Linda MckenzieAug 17, 2025
  If your Manitowoc Ice Maker has low ice capacity, start by cleaning the condenser. Ensure the air temperature around the ice maker (for air-cooled models) does not exceed 110° F (43°C) and that there is adequate clearance around the unit to allow proper airflow. Remove any objects blocking airflow to the condenser. Verify that the incoming water is cold and that the water pressure is within the range of 20-80 psi (137.9 -551.5 kPa), replacing the water filter if needed.
R
Robin FitzgeraldAug 20, 2025
Why is the ice quality poor in my Manitowoc UYF0310A Ice Maker?
- O
  ochoajoseAug 20, 2025
  If the ice quality from your Manitowoc Ice Maker is poor, start by testing the incoming water quality and install appropriate filters. Replace the water filter if water filtration is poor. Clean and sanitize the ice machine. If applicable, repair the water softener if it's not working properly.
J
Jordan ChristensenAug 25, 2025
Why is my Manitowoc Ice Maker producing shallow or incomplete cubes?
- P
  prestonjenniferAug 25, 2025
  If your Manitowoc Ice Maker produces shallow or incomplete cubes, adjust the ice thickness switch. Check the water trough level to ensure it is neither too high nor too low. Replace the water filter if water filtration is poor. Ensure the ice machine is connected to a cold water supply and that the incoming water pressure is between 20-80 psi (137.9 -551.5 kPa). Finally, level the ice machine.
C
Cindy WilkinsonAug 27, 2025
What to do if Manitowoc Ice Maker does not release ice?
- M
  Maria WeeksAug 27, 2025
  If your Manitowoc Ice Maker is not releasing ice or is slow to harvest, first clean and sanitize the ice machine. Then, ensure the ice machine is level. If you have an air-cooled model, check that the air temperature around the ice machine is at least 40° F (4°C).
A
Amber SuarezAug 31, 2025
Why is the ice sheet too thick in my Manitowoc UYF0310A?
- J
  James SextonAug 31, 2025
  If the ice sheet in your Manitowoc Ice Maker is too thick, adjust the ice thickness float to correct the water trough level. If the power button was turned off and on during the freeze cycle, allow the ice to thaw and release from the evaporator before restarting the machine. Also, if the ice damper was opened and closed during the harvest cycle before the ice released, allow the ice to thaw and release before restarting.
D
Daniel PinedaSep 4, 2025
What to do if Manitowoc Ice Maker does not cycle into harvest mode?
- A
  anthony13Sep 4, 2025
  If your Manitowoc Ice Maker does not cycle into harvest mode, first wait for the six-minute freeze time lock-in to expire. If that's not the issue, clean and sanitize the ice machine, as the harvest float switch might be dirty. Check if the harvest float switch wire is disconnected and connect it if necessary. Also, ensure the harvest float switch is properly adjusted.
J
Jacqueline MaldonadoSep 8, 2025
How to fix thick ice sheets in Manitowoc UYF0310A Ice Maker?
- B
  Benjamin MorrisSep 8, 2025
  If the ice sheet in your Manitowoc Ice Maker is too thick, adjust the ice thickness float to correct the water trough level. If the power button was turned off and on during the freeze cycle, allow the ice to thaw and release from the evaporator before restarting the machine. Also, if the ice damper was opened and closed during the harvest cycle before the ice released, allow the ice to thaw and release before restarting. In case of long harvest cycles with repeated safety limit indication, clean the ice machine and perform diagnostic procedures as required.

Manitowoc UYF0310A Specifications

General

Model	UYF0310A
Type	Undercounter Ice Maker
Storage Capacity	80 lbs
Dimensions (H x W x D)	38.5" x 30" x 24"
Weight	145 lbs
Condenser Type	Air-Cooled
Water Connection	3/8" FPT
Refrigerant	R404A
Voltage	115V
Power Supply	115V/60Hz/1Ph
Ice Production	310 lbs/24 hours
Ice Cube Type	Half-Dice
Ice Type	Half Dice or Dice
Width	30 Inches

Summary

Safety Notices

Installation

Location of Ice Machine

Electrical Requirements

Details voltage, fuse, circuit breaker, and ampacity requirements.

Water Service/Drains

Maintenance

Interior Cleaning and Sanitizing

General procedures for cleaning and sanitizing the ice machine interior.

Cleaning and Sanitizing Procedure U140, U190, U240, U310

Specific steps for cleaning and sanitizing these ice machine models.

CLEANING THE CONDENSER

Cleaning and Sanitizing Procedure UDE065

Specific steps for cleaning and sanitizing UDE065 models.

Cleaning and Sanitizing Procedure UDE080

Specific steps for cleaning and sanitizing UDE080 models.

Operation

Sequence of Operation U0140/UF0140/U0190/UF0190/U240/UF240/U310/UF310

Details the operational sequence for specific models.

Ice Making Sequence of Operation

Safety Limits

Outlines safety features that stop the machine under certain conditions.

Sequence of Operation UDE065

Details the operational sequence for UDE065 models.

Sequence of Operation UDE080

Details the operational sequence for UDE080 models.

Troubleshooting

Troubleshooting U0140/UF0140/U0190/UF0190/U240/UF240/U310/UF310

Guides on diagnosing issues for specific models.

Problem Checklist

Diagnosing an Ice Machine that Will Not Run

Troubleshooting steps for a non-operational ice machine.

Ice Machine Does Not Cycle Into Harvest when Water Loses Contact with the Harvest Float Switch

Refrigeration Component Diagnostics

Related product manuals

Manitowoc UYF0240A

Manitowoc NEO UY0140A

Manitowoc NEO UY0190A

Manitowoc NEO UY0240A

Manitowoc NEO UY0240W

Manitowoc NEO UY0310A

Manitowoc NEO UYP0240A

Manitowoc UDE080A

Preview: Manitowoc UDE065A

Manitowoc UDE065A

Manitowoc UDF0140A

Manitowoc NEO UD0140W

Manitowoc NEO UD0190A