Mannesmann VDO KIENZLE Fleet Manager 100 User Manual

Fleet Manager 100 English
10
During data transmission:
Vehicle registration
correct:
LED:
Buzzer:
- flickers - -. . . continuous flashing
– –
Vehicle registration
wrong:
LED:
Buzzer:
- - - . . . continuous flashing
Memory of green key
full, but still data to
transmit:
LED:
Buzzer:
flickers as long as memory available, followed
by - - -
– 5 Seconds tone
During calibration:
Calibration: LED:
Buzzer:
- - - - - - flickers
. . . until removal of calibration key
Setting date/time with
blue key:
LED:
Buzzer:
- flickers during data transmission -
– – –
= 1 second
3. Troubleshooting
LED does not flash No voltage Check the voltage supply of
the Fleet Manager 100
The Fleet Manager
100 can not be
enabled
The blue driver key is not
assigned to the vehicle
Use the correct driver key or
get the driver key assigned to
the vehicle
The buzzer warns
when turning on the
ignition
The driver registration was
not done or
Register with your blue driver
key
The blue driver key is not
released for the vehicle
Get your blue driver key
released for the vehicle and
register with it

Mannesmann VDO KIENZLE Fleet Manager 100 Specifications

General

Brand	Mannesmann
Model	VDO KIENZLE Fleet Manager 100
Category	GPS
Language	English