Mannesmann VDO KIENZLE Fleet Manager 100 - Buzzer Codes

Fleet Manager 100 English
9
2. Buzzer codes
General communication failure:
Communication failure
at data transmission:
LED:
Buzzer:
no changes
During start-up:
Armed: LED:
Buzzer:
- - - . . . continuous flashing
off
Requesting driver
registration:
LED:
Buzzer:
off
10 times while
turning on ignition or until driver registration
Driver registration
correct:
LED:
Buzzer:
goes off
– –
Driver registration
wrong:
LED:
Buzzer:
- - - . . . continuous flashing
– –
FM100 used memory
capacity
80%-95%:
LED:
Buzzer:
off after driver registration
one second after driver registration – – –
FM100 used memory
capacity
95%-100%:
LED:
Buzzer:
off after driver registration
one sec. after driver registration
While driving:
Exceed threshold
value while driving:
LED:
Buzzer:
off
while exceeding or shortly after