MANN+HUMMEL ProVent 100 - Technical Data

MANN + HUMMEL ProVent
MANN+HUMMEL Industrial Filters 22
6 Technical Data
Also see the corresponding order drawing (on request).
ProVent
100
ProVent
150
ProVent
200
ProVent
400
ProVent
800
Reference value for the
use of ProVent
up to 100 kW up to 200 kW up to 250 kW up to 500 kW up to 1,250
kW
Blow-by volume flow max.100 l/min max.150 l/min max. 200
l/min
max. 400
l/min
max. 800
l/min
Installation position vertical
Permitted angled position
of high axis
45° in all directions
Inlet 2 positions 1 position
additional on
request
Positioning
Outlet 4 positions can be
rotated in 3°
steps
12 positions 12 positions stepless
Ambient temperature -35°C to 120°C, briefly up to 140°C
Mounting, screwing
connection on engine
block
2xM8
2xM10
Housing Steel sheet
Lid PA GF
Material
Holder
PA GF
Steel sheet
Resistant to Diesel fuel, engine oil, lubricating oil, cold cleaner
Weight 0.25 kg 0.33 kg 0.39 kg 1.20 kg 5.41 kg
Possible use of parallel
connection of two
ProVent of same size
X X X X X