USER’S MANUAL
21
b) Press t / u button to select “Device List” and press the
“ENTER” button to the sub menu.
Trouble Shootiing
Before consulting service personnel, check the following chart
for possible solutions.
PROBLEM SOLUTION
TV will not turn on
Make sure the power cord is plugged in.
The batteries in the remote control may be
Exhausted; replace the batteries.
No picture, no sound
Check the cable between TV and antenna/ external AV device.
Press the power button on the remote.
Press the SOURCE button the remote, then press the / button repeatedly
to select the TV source.
Poor picture, sound OK
Check the cable between TV and antenna/ external AV device.
Try another channel, the station may have broadcast diculties.
Adjust the brightness/contrast in the Video menu. Check that the unit is set to
PAL
Audio noise Move any infrared equipment away from the TV.
c) Press t / u button to select “Scheduled Record” and press
the “ENTER” button to set.
Note:
1. The U disk will be formatted when in format, please do not
store important les in the U disk.
2. Press “ ” button for the rst time to start recording, for
the second time, the sign of recorder will be slimmed down, but
it’s still under recording.
To Next Page
Loading...
Need help?
General
