Mantis Swift Split User Manual

2
C. Unpacking and Assembly Instructions
1. Cut bands; remove cover and two inserts supporting the top and the bottom of the unit. Remove wheels, pivoting support
and hardware box from the box.
2. Put log splitter in the vertical position by holding the top of the beam and carefully lifting the top of the log splitter until it
can stand.
10
HARDWARE BAG
PIVOTING SUPPORT
#520104 (QTY=1)
WHEELS #520102 (QTY=2)
LOG SPLITTER WITH ATTACHED HANDLE

Mantis Swift Split Specifications

General

Brand	Mantis
Model	Swift Split
Category	Log Splitter
Language	English