3
OK
CALL
OK
CALL
CODE
DELETE
CODE
DELETE
CODE
DELETE
CODE
DELETE
Please dial:
_
time: 1-3
Enable
Input new code
>_
CODE
DELETE
7
PQRS
1.
Query User
2.
Display all users
User Operation
1. Outdoor station main menu shows: . Show “GSM” means under 2G mode, show “3G” means under 3G mode, will automatically
switch, number “15” means signal strength, number 1~31 means the signal strength, will automatically change basic local signal strength.
2. Calling: Visitors touch the keyboard, outdoor panel will display dial tips: , input room number and press to make call. If error
input, press to delete and then reinput. It will return back to main menu without any operation within 5 seconds or error input, also press
to return main menu. Before someone answer the calling, visitor press to hang off. Under talking, press to hang off, during
calling, press * call to next number (Please set three number as same one, if only have one user phone number), press “*” unlock door 1;
press “#” unlock door 2. When calling room number which is not exist on panel, it will prompt:
Did not find
.
3.
Password to unlock: Press could see:
if need personal code to open door, input room number, then #, enter the page
GSM
of code:
Pls enter code
, then input 6 digits code (only could 6 digits for personal code), last press to open door. If want to input common
unlock code, then press directly to input correct 2-6 digits password.
4. The Function Menu
1.Iinstruction
2. Query
1).
Instructions: Press outdoor station display function menu:
3. Set up
4. Sy
stem Information
return main menu, or it will return main menu automatically after 5 seconds.
and then press , will display . Press
Query: If visitors do not know the resident room number, they cansearch through with Query function.
I.
Search Room No.: Visitors press button, the outdoor panel will display function me , then press , it will display
. After input, press
OK
CALL
, it will show all names which included the letter you input, choice correct one (press 1 and 7 to turn up
and turn down, press 4 and 6 to turn left and right side), then press again to call the user directly, press exit the call. If did not find
the name, it will show
II.
Search tenant name list: Press
.
Name List Interface
, it will show , press is for the previous name, press it is for the next name.
Exit: * 1 7 Dial:#
Press to call the user, press
2).
Set up:
to exit the calling (Note: can’t exit when record pic before calling).
Administrator could set and modify unlock code and administrator code through this function menu, set admin. and resident phone No, set talking
time/Mic volume/Speaker volume, view resident pic, ect..
1.
instruction
1. Password set
2. System set
Press will display function menu:
2.
Query
, then press
, after
input
correct password
will
enter setting
menu
3.
User
set
, then
1.
Admin code
2.
Unlock password
4.
System Information
5.
Quest photos
enter password setting:
3. Enable unlock
4.
Disable unlock
, input 6 digits admin password (the default admin password is: 123456, change what you need, and
remember. If forget the password, please contact after-sales service).
I.
Password set:
Input 6 new code
* Admin code: Press to enter admin password setting page:
>_
, input 6 new digits password twice. If you input password twice correct,
the display will show "correct" and return to previous menu. If you input different password twice, it shows "Error" then back to previous page.
* Unlock Password: Press to enter unlock password setting page: , input new 2-6 digits password.
* Enable unlock: Press to enable the function of unlock code, display , then return to the previous page.
* Disable unlock: Press means disable the function of unlock with code, display:
1
Talk time
2
Micro volume
II.
System set: Press to enter the System Settings page:
3 Speaker volume
5.
Mode setting
, then return to previous page.
* Talk Time: Press to enter the page of talking time: ,1 - 3 minutes. Input 1 or 2 or 3 then return to previous page.
* Micro Volume: Press to enter the page of micro volume:
Micro volume
Operation: 0 ------8
Volume: 3
, 0 - 8 for microphone volume level. The higher the value, the louder.
The p
age shows "Micro Volume: 3" means the current micro volume. Return to previous post automatically when enter the relative number.
Speaker volume
WELCOME
Insert Room No.&#To Dial
Or Press #2 For Name List
1.
Call: input 1-4 room
No please.
2.
Password unlock:
Pls input room NO.:
Disable
Emp
Pls enter username
To Next Page
Loading...