Maple Armor FW6308-CLA1 - Modify Unlocking Code via SMS; Set Temporary Unlock Password; Installation Instructions

7
IV.Administrator SMS to modify unlocking code:
1) SMS modify Public unlocking code: 00*#New Password (Length of new code much same as the
device setting code).
2)SMS to modify Personal unlocking code (Must be 6 digits): 01*#NNNN#CCCCCC (NNNN
means 4 digits room number, CCCCCC means 6 digits new code).
V.Administrator SMS to set Temporary unlock password:
1) SMS set the number of times for Temporary password: 13*#XXX#CCCCCC (XXX means 3
digits numbers of times, CCCCCC means 6 digits temporary password), Maximum is 100 times.
Please Note: Set the number of times for Temporary password, Maximum6 times. If exceed 6 times,
from the 7 time, it will replace the first time set temporary password automatically.
For example: Need to set 30 times, password with 654321, then SMS: 13*#030#654321.Will get
back message “set success!” means set success. Or the message will be “set fail!”
2) SMS set the time for Temporary password:
14*#XXXX.XX.XX.XX#XXXX.XX.XX.XX#CCCCCC (XXXX.XX.XX.XX means Year,
Month, Day, Time, CCCCCC means 6 digits temporary password).
Please Note: Set the time for Temporary password, Maximum 6 times. From the 7 times setting, it
will replace the first time set temporary password if the first time set already expired. If the first time
set did not expired, then can’t set the 7 times set.
For example: Need to set password with 654321, valid Period from 2016. October 15th 10am to 2016.
October 16th 9am, then
SMS: 14*#2016.10.15.10#2016.10.16.09. Will get back message “set success!” means set success. Or
the message will be “set fail!”
Adjust Unlock delay time: Could adjust unlock delay time by yourself.