Maple Armor FW6308-CLA1 - Modify User Information via SMS; Manage Access Control via SMS; Manage Door Contact via SMS

6
SMS functions
I. Administrator SMS to modify user information:
*Modified the username: 02*#NNNN#cccc, NNNN means room number, cccc means username.
* Modified the user phone numbers:
1) 03*#NNNN#10086, 03 means operating instruction for modified the first phone no, NNNN means
room number, 10086 means phone number.
2) 04*#NNNN#10086, 04 means operating instruction for modified the second phone no, NNNN
means room number, 10086 means phone number.
3) 05*#NNNN#10086, 05 means operating instruction for modified the third phone no, NNNN means
room number, 10086 means phone number.
* Administrator SMS to delete user: SMS: 12*# Room number.
Note: If delete user via SMS, then Index, room number, username, and
phone numbers are all deleted.
II.Administrator SMS to manage access control:
*Delete Card: 06*#12 digits ID card number. (If less 12 digits, please
add the digits “0” to the front)
* Register new card: 07*#12 digits ID card number. (If less 12 digits, please add the digits “0” to the
front)
III. Administrator SMS to manage Door contact:
1) Check Door switch status: send 08*# to the panel, if the door is closed, it will send SMS back
with “door close”, if the door is opened, it will send SMS back with “door open”
2) Admin set unlock delay time: 09*#TTT, (TTT means time from 001--254s). For example, if want to
set the delay time of door contact is 10s, admin should send SMS: 09*#010.
3) Administrator SMS set to close the function of door contact alarm: SMS 10*# (Default setting is
open).
4) Administrator SMS set to open the function of door contact alarm: SMS 11*#.
5) Door Contact Alarm: If the door did not close in the delay time you set, GSM device will send
SMS to the first administrator mobile phone with the content of “ door is open”.