Turning the front panel illumination,
interior illumination and display on/off
Turn on/off the front panel illumination, interior illumination and display.
1
Press LIGHTING.
0
Each time the button is pressed, the front panel illumination,
interior illumination and display are turned on/off.
0
In the Settings menu, “Illumination” allows you to set the brightness of the front
panel illumination, interior illumination and display. (v p. 49)
0
When LIGHTING is pressed and lit, the front panel illumination, interior illumination
and display light up to the brightness set in “Illumination” in the Settings menu.
(v p. 49)
Using this unit as a power amplifier
When connecting a pre-amplifier and using this unit as a power amplifier,
switch the input source of this unit to “Power Amp Balanced” or “Power
Amp Unbalanced”.
Select “Power Amp Balanced” if the connection is balanced, or “Power
Amp Unbalanced” if the connection is unbalanced.
1
Use INPUT ml to switch the input source to “Power
Amp Balanced” or “Power Amp Unbalanced”.
“Power Amp Balanced” or “Power Amp Unbalanced” is displayed on
the display.
0
When the input source is “Power Amp Balanced” or “Power Amp Unbalanced”,
adjustment of the volume, balance and tone has no effect. Adjust these
adjustments on the pre-amplifier.
NOTE
0
When the input source is “Power Amp Balanced” or “Power Amp Unbalanced”, the
main unit outputs at maximum volume. Check the output level on the input device
before playing it and adjust the volume accordingly.
Contents Connections Playback Settings Tips Appendix
45
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
