Volume Scale
Set how the volume is displayed.
-99.5 dB – 0 dB
(Default):
Display volume in relative value.
0 – 100: Display volume in absolute value.
Phono
Sets the phono equalizer of this unit according to the type or impedance of
the turntable cartridge to be connected.
MM
(Default):
Set this for an MM cartridge.
MC-Low:
Use this setting for an MC cartridge of less
than 50 Ω/ohms.
MC-Mid:
Use this setting for an MC cartridge of
about 50 Ω/ohms.
MC-High:
Use this setting for an MC cartridge of 100
Ω/ohms or higher.
0
For an MC cartridge, select the input impedance closest to the impedance
recommended for the cartridge used or select a value a few times that of the
cartridge’s internal impedance.
0
If this setting change operation is performed, playback sound is output
approximately 4 seconds after the change.
Contents
Connections Playback Settings Tips Appendix
50
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
